#define NTP_API 4 /* NTP API version */ /* * syscall interface - used (mainly by NTP daemon) * to discipline kernel clock oscillator */ struct timex { unsigned int modes; /* mode selector */ long offset; /* time offset (usec) */ long freq; /* frequency offset (scaled ppm) */ long maxerror; /* maximum error (usec) */ long esterror; /* estimated error (usec) */ int status; /* clock command/status */ long constant; /* pll time constant */ long precision; /* clock precision (usec) (read only) */ long tolerance; /* clock frequency tolerance (ppm) * (read only) */ struct timeval time; /* (read only, except for ADJ_SETOFFSET) */ long tick; /* (modified) usecs between clock ticks */ long ppsfreq; /* pps frequency (scaled ppm) (ro) */ long jitter; /* pps jitter (us) (ro) */ int shift; /* interval duration (s) (shift) (ro) */ long stabil; /* pps stability (scaled ppm) (ro) */ long jitcnt; /* jitter limit exceeded (ro) */ long calcnt; /* calibration intervals (ro) */ long errcnt; /* calibration errors (ro) */ long stbcnt; /* stability limit exceeded (ro) */ int tai; /* TAI offset (ro) */ int :32; int :32; int :32; int :32; int :32; int :32; int :32; int :32; int :32; int :32; int :32; }; /* * Mode codes (timex.mode) */ #define ADJ_OFFSET 0x0001 /* time offset */ #define ADJ_FREQUENCY 0x0002 /* frequency offset */ #define ADJ_MAXERROR 0x0004 /* maximum time error */ #define ADJ_ESTERROR 0x0008 /* estimated time error */ #define ADJ_STATUS 0x0010 /* clock status */ #define ADJ_TIMECONST 0x0020 /* pll time constant */ #define ADJ_TAI 0x0080 /* set TAI offset */ #define ADJ_SETOFFSET 0x0100 /* add 'time' to current time */ #define ADJ_MICRO 0x1000 /* select microsecond resolution */ #define ADJ_NANO 0x2000 /* select nanosecond resolution */ #define ADJ_TICK 0x4000 /* tick value */ #define ADJ_OFFSET_SINGLESHOT 0x8001 /* old-fashioned adjtime */ #define ADJ_OFFSET_SS_READ 0xa001 /* read-only adjtime */ /* NTP userland likes the MOD_ prefix better */ #define MOD_OFFSET ADJ_OFFSET #define MOD_FREQUENCY ADJ_FREQUENCY #define MOD_MAXERROR ADJ_MAXERROR #define MOD_ESTERROR ADJ_ESTERROR #define MOD_STATUS ADJ_STATUS #define MOD_TIMECONST ADJ_TIMECONST #define MOD_TAI ADJ_TAI #define MOD_MICRO ADJ_MICRO #define MOD_NANO ADJ_NANO /* * Status codes (timex.status) */ #define STA_PLL 0x0001 /* enable PLL updates (rw) */ #define STA_PPSFREQ 0x0002 /* enable PPS freq discipline (rw) */ #define STA_PPSTIME 0x0004 /* enable PPS time discipline (rw) */ #define STA_FLL 0x0008 /* select frequency-lock mode (rw) */ #define STA_INS 0x0010 /* insert leap (rw) */ #define STA_DEL 0x0020 /* delete leap (rw) */ #define STA_UNSYNC 0x0040 /* clock unsynchronized (rw) */ #define STA_FREQHOLD 0x0080 /* hold frequency (rw) */ #define STA_PPSSIGNAL 0x0100 /* PPS signal present (ro) */ #define STA_PPSJITTER 0x0200 /* PPS signal jitter exceeded (ro) */ #define STA_PPSWANDER 0x0400 /* PPS signal wander exceeded (ro) */ #define STA_PPSERROR 0x0800 /* PPS signal calibration error (ro) */ #define STA_CLOCKERR 0x1000 /* clock hardware fault (ro) */ #define STA_NANO 0x2000 /* resolution (0 = us, 1 = ns) (ro) */ #define STA_MODE 0x4000 /* mode (0 = PLL, 1 = FLL) (ro) */ #define STA_CLK 0x8000 /* clock source (0 = A, 1 = B) (ro) */ /* read-only bits */ #define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \ STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK) /* * Clock states (time_state) */ #define TIME_OK 0 /* clock synchronized, no leap second */ #define TIME_INS 1 /* insert leap second */ #define TIME_DEL 2 /* delete leap second */ #define TIME_OOP 3 /* leap second in progress */ #define TIME_WAIT 4 /* leap second has occurred */ #define TIME_ERROR 5 /* clock not synchronized */ #define TIME_BAD TIME_ERROR /* bw compat */ #endif /* _LINUX_TIMEX_H */